4 Wheel Drive Forklift Chain

Pneumatic lift trucks are generally known as pallet vehicles or pump trucks and are broadly utilized in warehouses and shipping plants to transport materials on pallets. Pneumatic jacks include a pair of metallic forks installed on a wheeled counterweight that contains a pump. The pump is used to elevate and lower the forks.

Visually check the pallet vehicle before loading. Make sure the wheels are clear of any would-be obstructions. Moreover, ensure the handle moves fluently and turns properly. Inspect the pallet prior to moving it to assess if it is stacked in a manner that minimizes the possibility of anything falling off during lifting. Release any air in the pump and drop the forks to the ground by squeezing the handle mounted on the inside of the metal ring on the end of the lever. Slide the blades into the slots in the pallet and ensure the blades are centered so that the pallets' mass is evenly dispersed.

Pump the pneumatic jack lever up and down to elevate the blades from the floor. Discontinue pumping once the pallet is entirely off the floor as there is no need to lift it any higher or risk losing stability while turning. In order to move the pallet, tow the handle behind you; do not push it. There will be a huge amount of momentum existing. Avoid quick or sharp turns and don't stop too suddenly. Gently bring the pallet to a rest wherever you would like to park it. Squeeze the handle within the handle end to restore the forks to the ground. Pull out the forks from the pallet and return the pallet vehicle to its designated parking spot.

Click to Download the pdf

Forklift Masts and Parts

Sort by: Parts | Attachments | Parts By Brand

• 
  Anchor Pins
  

  More
• 
  Chain Anchors
  

  More
• 
  Chain Pins
  

  More
• 
  Chain Link
  

  More
• 
  Master Link
  

  More
• 
  Alternators
  

  An alternator is a device that changes mechanical energy into electric energy. This is done in the form of an electrical current. In essence, an AC electrical generator could likewise be called an alternator. The word usually refers to a small, ...

  More
• 
  Brakes
  

  A brake wherein the friction is supplied by a set of brake shoes or brake pads that press against a rotating drum unit called a brake drum. There are a few particular differences among brake drum kinds. A "brake drum" is commonly the definition ...

  More
• 
  Carriage Rollers
  

  Particularly designed bearings known as carriage rollers are frequently seen on lift masts because they allow them to function better within tough environmental surroundings. The typical lift mast is regularly subject to frequent oscillations, ...

  More